iTerm and dTerm suggestions

Discuss tuning PID coefficients to maximize system efficiency.
Post Reply
mharding
Posts: 11
Joined: Thu Jul 14, 2011 3:44 pm
Bot?: No
Contact:

iTerm and dTerm suggestions

Post by mharding »

iTerm would ideally be proportional to the target temperature - it takes more i to maintain 77°C than 50°C.

dTerm would ideally be blocked from increasing heat output when the temperature is above the set-point - a negative change above the set-point sees dTerm increasing the output when one least wants it.
Post Reply