Sucess!
Posted: Sun Jun 17, 2012 8:44 pm
Today I had my first successful brew with my RIMS system! Third time IS the charm. I insulated my mash tun with a water heater blanket, and made a lid for it with some styrofoam, ran my return from the RIMS tube through that. The mash temp was about 3-4 degrees lower than the temp in the tube, but I adjusted the set pooint up a bit, and the temp in the tun was right on.
I feel good about how the system ran today. THe other two times I have tried to use it, there were problems. First time was stuck mash, (fixed with rice hulls this time), second time I burned out the heating element, (fixed this time by mounting the tube vertically, and increasing flow). All in all, I am happy with the way it ran. Now I can get down to plumbing the water up to the HLT, and wiring the pump and other items neatly...
Don
I feel good about how the system ran today. THe other two times I have tried to use it, there were problems. First time was stuck mash, (fixed with rice hulls this time), second time I burned out the heating element, (fixed this time by mounting the tube vertically, and increasing flow). All in all, I am happy with the way it ran. Now I can get down to plumbing the water up to the HLT, and wiring the pump and other items neatly...
Don