Page 1 of 1

Alarms

Posted: Sat Aug 19, 2017 3:33 pm
by Belas Brew House
Hi All,
I just bought an used system and it has this controller on it but it is only used for temp probes. Is there a way I can set it to alarm when a timer ends?
or if it over shoots a temp or falls below?

Re: Alarms

Posted: Sat Aug 19, 2017 10:50 pm
by JonW
Yes, it will do all that. You will want to first check if it is on the 3.x series or 4.x series firmware. If it is 3.x, then upgrade the firmware to the latest version.

4.x Docs here: http://docs.embeddedcc.com/

Firmware here: https://forum.embeddedcc.com/viewtopic.php?f=11&t=2807