Welcome to the ECC Forum

Suggestions, Problems, Availability, etc. Everything is up for discussion.
Post Reply
User avatar
admin
Site Admin
Posts: 1
Joined: Thu Jul 10, 2008 6:34 pm

Welcome to the ECC Forum

Post by admin » Fri Sep 12, 2008 2:00 pm

Have questions about your BCS Temperature Control System? Suggestions? Post them here so the community can benefit.

Please read the Disclaimer.

Zulu
Posts: 15
Joined: Tue Oct 14, 2008 5:13 am

Re: Welcome to the ECC Forum

Post by Zulu » Tue Oct 14, 2008 5:16 am

Looking forward to learning more.

User avatar
ECC
Posts: 676
Joined: Fri Sep 12, 2008 12:29 pm
Bot?: No
Contact:

Re: Welcome to the ECC Forum

Post by ECC » Tue Jan 06, 2009 7:18 am

If this is your first time here, introduce yourself! Introductions

GeekSpirits
Posts: 6
Joined: Mon Sep 29, 2014 6:53 am
Bot?: No

Re: Welcome to the ECC Forum

Post by GeekSpirits » Mon Sep 29, 2014 7:05 am

I just started looking at using the BCS-460 for automating my distillery. The system seems to be reasonably priced and supports adequate I/O capability for what I need (worst case, I would do two systems). One thing I am still struggling with is with the whole interface thing. It looks like it is a HTML based interface, but I haven't found the webpage where you actually do the interface other than the link to controlling an actual system. Can someone point me to where the base webpage exist for interfacing to the controller (or does it reside on the controller so you need to have one you connect to?).

Thanks !

User avatar
JonW
Site Admin
Posts: 1606
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: Welcome to the ECC Forum

Post by JonW » Mon Sep 29, 2014 8:33 am

Welcome GeekSpirits!

Yes, the web interface is embedded into the BCS, so you need to point your browser to one in order to check it out. You can see one online at http://demo.embeddedcc.com .

Also take a look at this thread for the new 4.0 release that is just being finished up: http://forum.embeddedcc.com/viewtopic.php?f=11&t=2365
The new release really simplifies the interface and gives it a performance boost as well. The update will work for all existing units.

GeekSpirits
Posts: 6
Joined: Mon Sep 29, 2014 6:53 am
Bot?: No

Re: Welcome to the ECC Forum

Post by GeekSpirits » Mon Sep 29, 2014 7:46 pm

JonW wrote:Welcome GeekSpirits!

Yes, the web interface is embedded into the BCS, so you need to point your browser to one in order to check it out. You can see one online at http://demo.embeddedcc.com .

Also take a look at this thread for the new 4.0 release that is just being finished up: http://forum.embeddedcc.com/viewtopic.php?f=11&t=2365
The new release really simplifies the interface and gives it a performance boost as well. The update will work for all existing units.
Thanks a lot! The system looks really interesting and I think will work well for me.

clearwaterbrewer
Posts: 383
Joined: Wed Feb 09, 2011 3:43 pm
Bot?: No
Location: Clearwater, FL
Contact:

Re: Welcome to the ECC Forum

Post by clearwaterbrewer » Wed Oct 29, 2014 6:28 pm


Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests