Have questions about your BCS Temperature Control System? Suggestions? Post them here so the community can benefit.
Please read the Disclaimer.
Welcome to the ECC Forum
Re: Welcome to the ECC Forum
Looking forward to learning more.
Re: Welcome to the ECC Forum
If this is your first time here, introduce yourself! Introductions
-
- Posts: 6
- Joined: Mon Sep 29, 2014 6:53 am
- Bot?: No
Re: Welcome to the ECC Forum
I just started looking at using the BCS-460 for automating my distillery. The system seems to be reasonably priced and supports adequate I/O capability for what I need (worst case, I would do two systems). One thing I am still struggling with is with the whole interface thing. It looks like it is a HTML based interface, but I haven't found the webpage where you actually do the interface other than the link to controlling an actual system. Can someone point me to where the base webpage exist for interfacing to the controller (or does it reside on the controller so you need to have one you connect to?).
Thanks !
Thanks !
-
- Site Admin
- Posts: 1728
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Welcome to the ECC Forum
Welcome GeekSpirits!
Yes, the web interface is embedded into the BCS, so you need to point your browser to one in order to check it out. You can see one online at http://demo.embeddedcc.com .
Also take a look at this thread for the new 4.0 release that is just being finished up: http://forum.embeddedcc.com/viewtopic.php?f=11&t=2365
The new release really simplifies the interface and gives it a performance boost as well. The update will work for all existing units.
Yes, the web interface is embedded into the BCS, so you need to point your browser to one in order to check it out. You can see one online at http://demo.embeddedcc.com .
Also take a look at this thread for the new 4.0 release that is just being finished up: http://forum.embeddedcc.com/viewtopic.php?f=11&t=2365
The new release really simplifies the interface and gives it a performance boost as well. The update will work for all existing units.
-
- Posts: 6
- Joined: Mon Sep 29, 2014 6:53 am
- Bot?: No
Re: Welcome to the ECC Forum
Thanks a lot! The system looks really interesting and I think will work well for me.JonW wrote:Welcome GeekSpirits!
Yes, the web interface is embedded into the BCS, so you need to point your browser to one in order to check it out. You can see one online at http://demo.embeddedcc.com .
Also take a look at this thread for the new 4.0 release that is just being finished up: http://forum.embeddedcc.com/viewtopic.php?f=11&t=2365
The new release really simplifies the interface and gives it a performance boost as well. The update will work for all existing units.
-
- Posts: 383
- Joined: Wed Feb 09, 2011 3:43 pm
- Bot?: No
- Location: Clearwater, FL
- Contact: