Page 5 of 5
Re: Howto: Calibrate Temperature Probes
Posted: Tue Oct 25, 2016 4:53 pm
by mellman
Sorry for my ignorance here but once I've done the calibration and saved those settings, where do I go to view my coefficients?
Re: Howto: Calibrate Temperature Probes
Posted: Tue Oct 25, 2016 5:28 pm
by oakbarn
Settings Menu under the Temperature Pane:
- temps and coefdficents.jpg (169.84 KiB) Viewed 22519 times
Re: Howto: Calibrate Temperature Probes
Posted: Tue Oct 25, 2016 7:10 pm
by mellman
ah ha! for some reason I don't recall seeing that before, i'm going to blame the beer(s)
Thank you!
Re: Howto: Calibrate Temperature Probes
Posted: Tue Sep 25, 2018 1:29 pm
by TheAleMaster
Are there instructions about how to use bbrally’s tool? I can’t seem to find them. I haven’t used my BCS much in about four years in favor of a Zymatic, but I’m getting back into it and it seems my probes are about 7 degrees off at freezing and about 5 at 117. Not sure what’s going on.
Re: Howto: Calibrate Temperature Probes
Posted: Thu Sep 27, 2018 5:01 pm
by bbrally
Although stating to write a tutorial/help for the utilities I've written, I never have.
Is there something specific you'd like help with?
Re: Howto: Calibrate Temperature Probes
Posted: Fri Jun 02, 2023 2:51 pm
by plotto
Hi,
Trying to manually do an offset, there used to be a utility where you could put in an offset of say 2C but I cant seem to find it. Alot of the links are all dead now. Could somebody please help me in the right direction please.
I have opened the utility app on the settings page of the BCS but there is only the migrate, import export etc.
Alternatively if this project is dead, what is the alternatives now to the BCS?
Thanks in advance