Large Temp Display API

Describe your system and processes, and post your config file.
Post Reply
User avatar
Posts: 829
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas

Large Temp Display API

Post by oakbarn » Sun Jan 03, 2016 5:15 pm

I had a "dream" of a Large Screen Display of a single Temp Probe. We are generally not close enough to monitor the Temp of the Mash and I use Chrome Cast to cast the BCS UI to a 55 Inch screen near the Brewery. The Temp Displays are too small to see across the room so I wanted a big Single Display.

With a lot of help of bbralley :ugeek: I mangled some javascript together that does what I want.

Here is a link to the files. There is one for each probe. There are two subfolders that you will need as well under the Javaprobes folder. ... Ry9za?dl=0

There is an html file for each probes (0 to 7) for the BCS 462. It works in F or C.

If the Probe is within 1 degree of the Setpoint, it is GREEN
temp4goodS.png (66.5 KiB) Viewed 971 times
If greater than +1 degree, it is RED,
temp4HotSg.png (66.55 KiB) Viewed 971 times
if less than -1 degree, it is BLUE.
temp4coldS.png (68.18 KiB) Viewed 971 times
I use it to monitor the MASH as well as Cooled Wort.

You do need to put in the IP Address and the Probe Number is just for reference.

Posts: 539
Joined: Thu Dec 13, 2012 11:01 am
Bot?: No

Re: Large Temp Display API

Post by brahn » Sun Jan 03, 2016 6:39 pm


Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests