Large Temp Display API
Posted: Sun Jan 03, 2016 5:15 pm
I had a "dream" of a Large Screen Display of a single Temp Probe. We are generally not close enough to monitor the Temp of the Mash and I use Chrome Cast to cast the BCS UI to a 55 Inch screen near the Brewery. The Temp Displays are too small to see across the room so I wanted a big Single Display.
With a lot of help of bbralley I mangled some javascript together that does what I want.
Here is a link to the files. There is one for each probe. There are two subfolders that you will need as well under the Javaprobes folder.
https://www.dropbox.com/sh/gf8y8z5f5a7v ... Ry9za?dl=0
There is an html file for each probes (0 to 7) for the BCS 462. It works in F or C.
If the Probe is within 1 degree of the Setpoint, it is GREEN If greater than +1 degree, it is RED, if less than -1 degree, it is BLUE. I use it to monitor the MASH as well as Cooled Wort.
You do need to put in the IP Address and the Probe Number is just for reference.
With a lot of help of bbralley I mangled some javascript together that does what I want.
Here is a link to the files. There is one for each probe. There are two subfolders that you will need as well under the Javaprobes folder.
https://www.dropbox.com/sh/gf8y8z5f5a7v ... Ry9za?dl=0
There is an html file for each probes (0 to 7) for the BCS 462. It works in F or C.
If the Probe is within 1 degree of the Setpoint, it is GREEN If greater than +1 degree, it is RED, if less than -1 degree, it is BLUE. I use it to monitor the MASH as well as Cooled Wort.
You do need to put in the IP Address and the Probe Number is just for reference.