I had a "dream" of a Large Screen Display of a single Temp Probe. We are generally not close enough to monitor the Temp of the Mash and I use Chrome Cast to cast the BCS UI to a 55 Inch screen near the Brewery. The Temp Displays are too small to see across the room so I wanted a big Single Display.
With a lot of help of bbralley I mangled some javascript together that does what I want.
Here is a link to the files. There is one for each probe. There are two subfolders that you will need as well under the Javaprobes folder.
https://www.dropbox.com/sh/gf8y8z5f5a7v ... Ry9za?dl=0
There is an html file for each probes (0 to 7) for the BCS 462. It works in F or C.
If the Probe is within 1 degree of the Setpoint, it is GREEN
If greater than +1 degree, it is RED,
if less than -1 degree, it is BLUE.
I use it to monitor the MASH as well as Cooled Wort.
You do need to put in the IP Address and the Probe Number is just for reference.
Large Temp Display API
-
- Posts: 2
- Joined: Wed Nov 06, 2019 6:15 am
- Bot?: No
Re: Large Temp Display API
I know this is an old thread but I just discovered it and love the large temp displays.
I was wondering if you have ever tried to use on a raspberry pi? I am attempting to get it to work but currently no luck as I am not that computer sauve. If you have any suggestions it would be greatly appreciated.
I was wondering if you have ever tried to use on a raspberry pi? I am attempting to get it to work but currently no luck as I am not that computer sauve. If you have any suggestions it would be greatly appreciated.
-
- Posts: 2
- Joined: Wed Nov 06, 2019 6:15 am
- Bot?: No
Re: Large Temp Display API
Well I was able to get this to work on the raspberry Pi. Next step will be to see if I can figure the coding so that it will automatically load my BCS IP address and start when raspberry pi is started.
Re: Large Temp Display API
I use a Dynamic DNS