Page 1 of 1

Web based DIN button?

Posted: Sun Sep 08, 2019 4:33 pm
by btcruiser
OK, so at one time there appeared to be a web based input button that could be used as an input to a “Wait for Input”, but I can find no such animal running 4.1.2 on a BCS-460. Before I go spend money on a new switch and drill a hole into my front panel I need to ask if I’m missing something? Thanks.

Re: Web based DIN button?

Posted: Mon Sep 09, 2019 9:14 pm
by JonW
The older 3.x firmware has the WIN buttons. Their only use was as a trigger to exit a state (to move to another state). With the 4.x firmware, that functionality isn't needed since all state buttons are shown at the same time in the UI, so you can directly jump to any state without needing the WIN button to trigger it.

Re: Web based DIN button?

Posted: Tue Sep 10, 2019 9:33 pm
by btcruiser
OK, I see this now... What I was getting hung up on, in my mind, is I'm supposed to click on the yellow blinking button to acknowledge the wait state and continue on to the next state :oops:. It is kind of a moth and flame thing where the attention is drawn to the indicator and the natural tendency is to respond to the indication. Oh well, I know now, and I'll just have to rewire a few neurons to adjust my behavior accordingly. Thank you for the response.