my Brew Buddy app is possessed!
Posted: Sat Jul 09, 2011 7:46 pm
Brew Buddy toggles processes on and off continuously on my BCS-462....
I have the web interface up and when I start Brew Buddy, things get really wacky if I already have a process going or start a process with either the web ui or Brew Buddy. Brew Buddy apparently just keeps toggling processes on and off, even if I start a un-configured process... sometimes I have to 'stop all' several times on the web ui to get my relays and SSR's from seeming possessed...
(it does it faster on local connection, but if I turn off WiFi on phone and use 'auth-example' login, it slows down...) It is like the process of 'checking' is actually 'updating' and there is a feedback loop.
Things work perfectly without Brew Buddy started on phone.
Firefox 5.0
BCS 3.3
app store says everything is up to date...
troubleshooting -
closed browser
killed Brew Buddy app on my iPhone4 with the double home click
power off phone
power cycled BCS
powered on phone
waited 5 minutes
start Brew Buddy
enable control
go to processes page
start mash process
process immediately starts toggling, and I am unable to get it to stop unless I hit the home button...
if i restart Brew Buddy, it starts toggling...
I can crash Brew Buddy by rapidly tapping on the process on/off button
Reset Controller to defaults...
start a process... it toggles about 10 times and then shuts process off
disconnected all connectors except network and power, same issues...
I tried to load my saved settings, and they would not take... power-cycled, etc, still no-go.. tried to do firmware update, but it would not request file from tftp server...
I finally did a 10 second push on the reset button to do a hard reset, and was able to upload my system and process settings... whew...
issue with Brew Buddy cycling process still there after all that...
I have the web interface up and when I start Brew Buddy, things get really wacky if I already have a process going or start a process with either the web ui or Brew Buddy. Brew Buddy apparently just keeps toggling processes on and off, even if I start a un-configured process... sometimes I have to 'stop all' several times on the web ui to get my relays and SSR's from seeming possessed...
(it does it faster on local connection, but if I turn off WiFi on phone and use 'auth-example' login, it slows down...) It is like the process of 'checking' is actually 'updating' and there is a feedback loop.
Things work perfectly without Brew Buddy started on phone.
Firefox 5.0
BCS 3.3
app store says everything is up to date...
troubleshooting -
closed browser
killed Brew Buddy app on my iPhone4 with the double home click
power off phone
power cycled BCS
powered on phone
waited 5 minutes
start Brew Buddy
enable control
go to processes page
start mash process
process immediately starts toggling, and I am unable to get it to stop unless I hit the home button...
if i restart Brew Buddy, it starts toggling...
I can crash Brew Buddy by rapidly tapping on the process on/off button
Reset Controller to defaults...
start a process... it toggles about 10 times and then shuts process off
disconnected all connectors except network and power, same issues...
I tried to load my saved settings, and they would not take... power-cycled, etc, still no-go.. tried to do firmware update, but it would not request file from tftp server...
I finally did a 10 second push on the reset button to do a hard reset, and was able to upload my system and process settings... whew...
issue with Brew Buddy cycling process still there after all that...