HMI Builder available in 4.0?
-
- Posts: 5
- Joined: Thu Oct 01, 2015 4:32 pm
- Bot?: No
HMI Builder available in 4.0?
Is the HMI builder still available in firmware version 4.0, or is it replaced by the APIs?
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: HMI Builder available in 4.0?
4.0 does not currently have an HMI builder.
Re: HMI Builder available in 4.0?
Are there any thoughts to adding an HMI builder to 4.0?
There's nothing like planning. And this is, nothing like planning.
Re: HMI Builder available in 4.0?
Bumping this topic since it's been well over a year since the first post and not a lot of chatter here. Will there be an HMI builder interface available in the 4.x firmware?
-
- Posts: 1
- Joined: Tue Dec 15, 2015 7:03 am
- Bot?: No
Re: HMI Builder available in 4.0?
Will there be an HMI builder interface available in the 4.x firmware?
Re: HMI Builder available in 4.0?
This is very cool but for fermentation the old HMI was super simple and sweet. Does anyone have the old links to the BCS-462 firmware that used the original HMI. Think it was version 3.7.1? Please let me know. Thank you in advance!!
Re: HMI Builder available in 4.0?
Thank you Oakbarn!!! I just ordered a BCS-462 to work with and try to master the HMI. Really struggled with it on my first attempt on someone else's. I think if I have y own to work with it will make things a lot easier. We just added another three 3bbl fermenters and the PID I replaced on our Perlick 4410 would not drop below 40. Going to test a Powerswitch tail SSR inline with the compressor so I can bring the temp down to 20 and implement some rest periods for the compressor. Playing with some ideas and fiddling with the HMI info you sent me before. Thank you very much!!!
Re: HMI Builder available in 4.0?
This is a pix of my HMI GUI for my fermentors.