Since day 1, any firmware upgrade clears the configuration. Always been that way. That is what backup/restore is for.clearwaterbrewer wrote: ↑Sun Nov 26, 2017 5:22 amHow damn hard is it to put a warning in the firmware upgrade section to let you know your recently modified config will be wiped the hell out??? really?????
BCS 4.1.1 Firmware Released
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS 4.1.1 Firmware Released
-
- Posts: 383
- Joined: Wed Feb 09, 2011 3:43 pm
- Bot?: No
- Location: Clearwater, FL
- Contact:
Re: BCS 4.1.1 Firmware Released
Automation is to reduce work and mistakes... Most everyone here can agree with that, right? I think most people on here go on with their lives and their brewing and can go 6-12 months or more between upgrades, and it is easy to forget in this world of upgrading your phone, your PC, etc.. that you need to save via an internet tool to upgrade...
Re: BCS 4.1.1 Firmware Released
Yes, you're right. Given how frequently most people upgrade an extra warning is probably a good idea.
Re: BCS 4.1.1 Firmware Released
When you have more than a single Radio Button in the Outputs Direct or a DIn in the Exit, only the bottom one displays nin the Process Editor. They work fine, but you cannot see what is chosen.
Re: BCS 4.1.1 Firmware Released
Can anyone give me their recommendations for tftp server software? I’ve been trying to upgrade using the free Solarwinds software but getting knowhere fast, the bcs just freezes and need a restart when trying to upgrade.
Re: BCS 4.1.1 Firmware Released
I tried Solarwinds (Windows) to no effect, and TFTP server on my MAC (but w/HighSierra couldn't get it to work).
I ended up using a spare Raspberry pi with TFTP server to update my BCS.
I ended up using a spare Raspberry pi with TFTP server to update my BCS.
Thomas Brophy
AleForce Homebrewery
AleForce Homebrewery
Re: BCS 4.1.1 Firmware Released
I have used FTP util
Re: BCS 4.1.1 Firmware Released
I've just discovered the same problem Oakbarn mentioned earlier.
Here's an animation:
]
Here's an animation:
]
- Attachments
-
- 20180122_065457.gif (125.09 KiB) Viewed 12928 times
Move, copy, clear proc/states: http://manipulator.from-ca.com/
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
- AndrewsBrewing
- Posts: 35
- Joined: Sat Feb 14, 2015 10:06 am
- Bot?: No
- Contact:
Re: BCS 4.1.1 Firmware Released
I am seeing what appears to be missing images on the dial that is being used by a process. Two little boxes. Is that right?
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS 4.1.1 Firmware Released
What browser are you using? Those should be displaying up/down arrows for changing the setpoint.