BCS 482 DINs

Get help and insight.
Post Reply
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

BCS 482 DINs

Post by oakbarn »

According to the forum"
"Inputs / Outputs
Along with the eight temperature sensor inputs, the BCS-482 provides eight 12VDC discrete inputs. All inputs can trigger controller responses. Sixteen 150mA 12VDC discrete outputs are provided for relay control or can directly drive many electric ball valves on the market. Eight of the outputs can be controlled by PWM, differentially by a temperature input, or under complete PID control. The remaining 10 outputs provide on/off control."


I have two DINs that were left on for a month. These are my float switches that I have in the NC mode. I left them on for years with the BCS 462. It seems they are no longer working on the BCS 482. Did I burn the out?
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: BCS 482 DINs

Post by JonW »

You didn't burn them out unless you somehow fed high voltage back into them. I suspect you have something else going on.
Post Reply