So im changing config files and it hanging the settings and process 0 - 1 change but then it hangs, what am I doing wrong, so im still using firmware v 4.0 build 5cbda61, im attempting this via the bsc utilities the files are stored on a network drive if that makes a difference and the bsc 460 is connected via wifi not direct to the router.
Any advice please
Tia
Pesh
problems changing config files
Re: problems changing config files
Try just changing the Settings only.
Then Just Process 0
Then Just Process 1.
and so on. You could have a corrupt json file.
See which one is bad.
Then Just Process 0
Then Just Process 1.
and so on. You could have a corrupt json file.
See which one is bad.
Re: problems changing config files
Trying using this version:
http://lawn-chair.github.io/bcs-backup/
The one linked through the BCS seems to be older and no longer works properly.
http://lawn-chair.github.io/bcs-backup/
The one linked through the BCS seems to be older and no longer works properly.
Last edited by bbrally on Mon Sep 17, 2018 2:51 pm, edited 1 time in total.
Move, copy, clear proc/states: http://manipulator.from-ca.com/
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
Re: problems changing config files
Thanks, its probably worth upgradeing then, ill see if I can work out how.
Pesh
Pesh
Re: problems changing config files
Im struggling to update this too, could this be related ?, is there a TFTP server thats recommended, I have 2 bcs460's and im having the same problems with both so this must be some thing im doing wrong ?
Any idea's ?
Pesh
Any idea's ?
Pesh
Re: problems changing config files
I should point out that every thing else works just fine all outs and temp probes are working, so the bcs isn't broken.
Pesh
Pesh
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: problems changing config files
This is the one I use. Very simple.
http://www.tftpd64.com/
http://www.tftpd64.com/
Re: problems changing config files
Thanks Jon, but I cant get that one to work either ?
Im putting the ip of the bcs in the host with the Port no.
the .bin file is selected, block size left as default, the update firm ware on the 460 is set to the ip of the laptop the .bin is on ( I googled this), but the block# stays on 0 the bsc does re-set its self, so it is trying to do something.
What am I doing wrong ?
Pesh
Sorry this should be easy
Im putting the ip of the bcs in the host with the Port no.
the .bin file is selected, block size left as default, the update firm ware on the 460 is set to the ip of the laptop the .bin is on ( I googled this), but the block# stays on 0 the bsc does re-set its self, so it is trying to do something.
What am I doing wrong ?
Pesh
Sorry this should be easy
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: problems changing config files
I don't know where you're referring to putting a host and port.
The TFTPD program binds to your local PC IP address and defaults to using port 69. Don't need to change any of that. On the BCS, you specify the IP address of your PC (the IP that TFTPD is bound to). The BCS then sends a request to that IP on port 69 for the file bcs460.bin (don't rename the file). Make sure the file bcs460.bin is in the same folder as the TFTPD app, or set the "Base Directory" option in TFTPD to the folder where bcs460.bin exists.
Check that your firewall is allowing incoming connections on port 69 for UDP.
Also, is your BCS on a wireless extender? Many of those are notorious for blocking UDP requests which are needed for not only TFTPD, but for the BCS locator.
The TFTPD program binds to your local PC IP address and defaults to using port 69. Don't need to change any of that. On the BCS, you specify the IP address of your PC (the IP that TFTPD is bound to). The BCS then sends a request to that IP on port 69 for the file bcs460.bin (don't rename the file). Make sure the file bcs460.bin is in the same folder as the TFTPD app, or set the "Base Directory" option in TFTPD to the folder where bcs460.bin exists.
Check that your firewall is allowing incoming connections on port 69 for UDP.
Also, is your BCS on a wireless extender? Many of those are notorious for blocking UDP requests which are needed for not only TFTPD, but for the BCS locator.
Re: problems changing config files
I find this one the easiest to use:
https://sourceforge.net/projects/tftputil/
Sometimes I have to try several times before I get it to work.
https://sourceforge.net/projects/tftputil/
Sometimes I have to try several times before I get it to work.
Last edited by oakbarn on Tue Sep 18, 2018 4:25 pm, edited 1 time in total.