There must have been some miscommunication there. The 460 runs the same 4.x firmware as the 462. It has the same processor, same memory, etc. as the 462. Check out our demo site with a 460 running 4.1.2 at http://demo.embeddedcc.com . Now, the 482 is a different story. That firmware is not compatible with the 460/462 controllers.andrewg wrote: ↑Mon Oct 29, 2018 3:59 pmI gave the 15 second reset a try a few times still nothing. I talked to derrin at brew hardware turns out the bcs 460 cannot accept firmware 4.1.1 which is probably where this thing went haywire. needs a reflash direct on the board from the sound of it. bad news is I cant brew till I get a working bcs
By sending it to Brewers Hardware, Derrin will flash it for you and get you on the latest version.